Knowledgebase
How to update the firmware on your Pro Racing™ Force Feedback Wheel and Pedals for Xbox One
Posted by on 17 March 2017 04:33 AM

To update the firmware on your Pro Racing™ Force Feedback Wheel and Pedals for Xbox One, first of all you will need to download the firmware program from the Mad Catz download page: http://www.madcatz.com/downloads/  

You will need to pick the 32 or 64 bit version that is the same as your PC operating system.  To check whether you are running 32 or 64 bit Windows, look in your system information (press the left Windows button + Pause/Break at the same time to bring that window up).

Once downloaded, please run the package installer.  This will install some drivers and the firmware updater program.

1.  Run the firmware updater program from the short cut link on your desktop:

2.  Click Next

3.  Click I AGREE

4.  The NEXT button will be grayed out until the wheel is put into firmware update mode.  To do this follow the instructions on the page.  You will need to make sure the wheel is unplugged, then press the guide and X buttons and then plug the USB port in.  Note you don't need to plug in the power adapter for the firmware update process to work.

5.  The actual firmware update should be very quick and the page will display a complete message:

6.  Click close.  You can now re-plug the wheel back into the Xbox One.